Kirkas, läpinäkyvä LED-valo ulospäin suuntautuviin näyteikkunoihin ja puoliulkotiloihin. Valitse Holographic auringonvalolle ja UV-säteilylle altistumiseen, suurempiin esittelyalueisiin ja vaativiin pitkäaikaisiin kiinteisiin asennuksiin.
Holographic LED uses an open mesh to display content while keeping the space behind it visible. It is our preferred route for outward-facing glass where brightness, sun exposure and permanent operation drive the specification.
Glass-mounted Holographic is self-adhesive. For a semi-outdoor shopfront, specify the brightness configuration around window orientation, direct sun and UV exposure. For larger permanent displays, plan power distribution, operating hours and maintenance access with the layout.
For outdoor project requirements, start with Holographic and confirm protection for the actual weather exposure. Panels, power supplies and connections must be specified as one installation.
Our Holographic uses integrated-driver static driving, parallel addressing and serviceable LEDs. Compare these with the architecture specified in each supplier’s quotation.
Holographic uses evenly spaced pixels in both directions. Designs with different horizontal and vertical pitch have different sampling density on each axis. Compare both pitch figures when assessing text and image detail.
Our LEDs integrate their drivers and use static driving. Multiplex-scanned designs illuminate rows in sequence. For filmed installations, compare samples at the same brightness, shutter speed and frame rate.
Parallel addressing lets the remaining LEDs receive data after an individual LED fails. Some bypass-based designs can lose downstream pixels when adjacent faults interrupt both signal paths. Check the fault behaviour of the proposed design.
A trained technician can replace an individual surface-mounted LED on Holographic mesh. In designs without individual LED service, the replacement unit may be a module or glass panel. Compare repair access and replacement scope.
Choose LED Film for indoor exhibitions, art centres and art installations where close integration with glass, high transparency and broad curves lead the design. The recommended minimum curve diameter is 1 m, with enough space for installation.
Explore LED film
Choose Holographic for semi-outdoor locations, outward-facing shop windows, high brightness and sun / UV exposure. It is the preferred route over Film for outdoor project requirements, larger areas, long-term fixed operation and demanding environments. Confirm the configuration for the site.
Pyydä tarjous kokoonpanostaP3.91 for finer graphics and lettering; P6.25 for larger graphics and a more open mesh. Assess the content at the nearest viewing position.
Tavanomainen lähtökohtamme tuotegrafiikalle ja -teksteille. Tarkista kuva lähimmästä katselukohdasta.
Discuss this pitchConsider P6.25 for larger graphics and a clearer view through the mesh. Balance the content, distance and budget.
Discuss this pitchMore pixels for detailed imagery and closer viewing. Choose this option when the extra resolution justifies a significantly higher budget.
Discuss this pitchFor demanding detail at close viewing distances. P2 has a significantly higher price; assess a sample with your intended content.
Discuss this pitchVisual transparency is specific to the LP configuration. Confirm the selected mesh with a sample on your glass; installed appearance also depends on glazing, background and viewing angle.
Glass mounting is the primary route for shop windows. Suspended, framed, mobile poster and rental configurations serve projects with different support or handling requirements.
A self-adhesive transparent mesh for shop windows viewed from outside. Specify brightness, sun / UV exposure, edge connections and access for long-term service.
Pane dimensions, orientation, sun / UV exposure, operating hours and service access.
A hanging configuration positions the display within an atrium, showroom or event space. Plan the suspension hardware and service route with the supporting structure.
Näytön koko, ripustuspisteet, asennuskorkeus ja huoltopisteet.
A floor-standing mobile format for demonstrations, retail promotions and changing event layouts. Select the complete display, support and playback configuration together.
Näytön koko, määrä, muuttoreitti, toistotarpeet ja kuljetussuunnitelma.
A framed configuration gives the mesh a defined support and perimeter for a freestanding or integrated installation. Frame dimensions and finish follow the project brief.
Valmiit mitat, rungon viimeistely, asennusasento ja pääsy.
A cabinet configuration for rental use. Evaluate assembly, connections, handling protection and packing as a complete system alongside the display pitch.
Seinän koko, tapahtuman käyttötarkoitus, kokoamistapa, varaosat ja kotelovaatimukset.
For direct sunlight and UV exposure, prioritise Holographic and specify brightness against glass tint, reflections and content. Record orientation, hours of direct sun and daytime temperature at the display position.
For larger display areas and long-term fixed operation, plan the panel layout, power circuits, ventilation and maintenance zones together. Specify the daily operating schedule and access to individual display sections before installation.
Plan where the power and control housings sit, how signal reaches each section and how a technician accesses the connections. Glass divisions and the support structure influence the layout.
For demanding environments, confirm temperature, rain and dust exposure, protection of power and signal connections, and reachable service points. Specify matching spares and panel removal procedures for the installed configuration.
Media source, sending controller, receiving hardware and display panels. NovaStar and Colorlight are the standard control routes; select the hardware around the pixel load and playback requirements.
TH reference configurations are listed below. Specify brightness and exposure protection for the selected glass-mounted, framed or supported assembly.
| määrittely | P3.91 | P6.25 |
|---|---|---|
| Kuvapisteväli | 3.91 mm | 6.25 mm |
| Pikselimäärä | 65,536 pikseliä / m² | 25,600 pikseliä / m² |
| Kirkkaus | 3500-4500 nittiä | 3500 nits |
| Virkistystaajuus | 3,840 Hz | 3,840 Hz |
| Harmaasävy | 16 bit | 16 bit |
| Ohjauskonfiguraatio | NovaStar / Colorlight | NovaStar / Colorlight |
TH brightness depends on the selected configuration. Glass-mounted, poster, framed and rental assemblies are specified with their own module sizes, brightness and overall dimensions.
P2.9 ja P2 ovat saatavilla korkeamman resoluution vaatimuksiin, ja niiden budjetti on huomattavasti suurempi.
Measure the complete assembly, including the control housing and support. Mesh thickness alone does not define the installed depth.
Enter your display dimensions and the unit rate from your quotation. Compare the display budget for your selected pitch and installation format.
Use a rate for the selected pitch, brightness and installation format. For divided windows, calculate panes separately. Final chargeable area follows the approved module layout.
12.00 m² · P3.91 · Lasikiinnitteinen. Lisää laskelmointiin antamasi USD/m² hinta.
The estimate multiplies display area by your quoted USD/m² rate. Brightness, control equipment, mounting hardware, packing, freight and installation follow the scope of that quotation.
Get a configuration quoteDOIT VISION helps select pitch, brightness and mounting around your pane dimensions, viewing distance and sun exposure. The quotation identifies the display configuration and environmental protection for your installation.
Review the panel layout, power and signal routing, control equipment and mounting instructions together. Identify accessible connection points before the glass layout is finalised.
Specify matching spare parts, access for LED repair or panel replacement, and replacement adhesive for suitable glass-mounted panels. Agree packing, transport, installation responsibilities and warranty terms with the order.
Send a representative video or graphic with the glass dimensions. Request sample evaluation at the intended viewing distance, plus the configuration specification and connection plan for your installer.
Request project documentsChoose Holographic LED for outward-facing shop windows, semi-outdoor glazing and projects requiring high brightness under sunlight or UV exposure. It is our preferred route over LED Film for larger display areas, long-term fixed operation and demanding environments. Share the site orientation, dimensions and operating schedule so the brightness, mounting, protection and service layout can be specified for the actual installation.
Holographic is the preferred route for sun-facing shop windows, semi-outdoor use, high brightness, UV exposure and demanding permanent displays. LED Film serves indoor exhibitions, art centres and art installations where close glass integration, broad curves and high transparency matter most. For Film, the recommended minimum curve diameter is one metre with installation access. When visual requirements overlap with challenging operating conditions, start with Holographic.
P3.91 ja P6.25 ovat tavanomaiset lähtökohtamme holografisissa LED-projekteissa. P3.91 sijoittaa enemmän pikseleitä samalle näyttöalueelle, mikä auttaa, kun sisältö kaipaa tarkempia yksityiskohtia. P6.25 kannattaa arvioida suurempien grafiikoiden ja avoimemman verkkoulkoasun saamiseksi. Valitse todellisten näytön mittojen, lähimmän katseluasennon, sisällön ja projektin budjetin perusteella ja vertaa sitten näytettä aiotulla etäisyydellä.
Harkitse P2.9- tai P2-vaihtoehtoa, kun vaadittu kuvan yksityiskohtaisuus ylittää P3.91- tai P6.25-vaihtoehdon tarjoaman tarkkuuden aiotulla katseluetäisyydellä. Nämä hienojakoisemmat vaihtoehdot ovat huomattavasti kalliimpia. Pienikokoiset kirjaimet, yksityiskohtaiset tuotekuvat ja läheltä katsottuna lisäresoluutio voivat perustella lisäresoluution tarpeen. Jaa edustavaa sisältöä ja näytön mittoja, jotta suurempaa pikselimäärää voidaan arvioida todellista visuaalista vaatimusta ja budjettia vasten.
Between Holographic and LED Film, choose Holographic when the project involves a large display area, long-term fixed operation or demanding environmental conditions. Plan the panel layout, power circuits, control distribution and maintenance access as one system. For outdoor requirements, confirm the environmental protection of the selected configuration. Include daily operating hours, service access and spare-part requirements in the brief before the installation layout is finalised.
Compare horizontal and vertical pixel spacing, driving architecture, fault behaviour and repair access. Holographic combines integrated LED drivers, static driving and parallel addressing with an evenly spaced pixel layout. These affect image detail, row-scan behaviour and how an individual LED fault affects the remaining pixels. Evaluate the selected configuration with your actual content, viewing distance and camera settings if the display will be filmed.
Start with Holographic when high brightness, direct sun and UV exposure are project requirements. Send the window orientation, hours of direct sunlight, glazing details and daytime photos. Select brightness around reflections, background and content, then review the temperature at the display, ventilation and daily operating schedule. For semi-outdoor locations, define actual rain exposure and protection for the complete assembly, including power and signal connections.
Sarja voidaan toimittaa lasiin liimautuvaksi, riippuasennukseksi, liikuteltavaksi julisteeksi, kehystetyiksi esillepanoiksi ja vuokrakaapeiksi. Valitse muoto sen mukaan, miten näyttöä käytetään ja siirretään. Pysyvä ikkuna, lattialla seisova esillepano ja vuokraseinä tarvitsevat erilaiset tukirakenteet ja käsittelyjärjestelyt. Valittu kiinnitysväli, mitat, kiinnityskomponentit, ohjauslaitteet ja pakkaus määritetään yhdessä projektitarjouksessa.
Yes. Replacement adhesive can be supplied for glass-mounted Holographic panels. We recommend no more than three reapplication operations after the first installation, subject to the condition of the mesh, connections and adhesive. Inspect the panel before removal and prepare the new glass surface. LED Film follows a different condition: its original adhesive cannot be replaced, and repositioning is limited to shortly after initial installation.
A quotation should identify pitch, display dimensions, brightness, mounting format and protection for the intended exposure. Include sunlight and UV conditions, operating hours and service access in the project brief. Itemise panels, power and control equipment, mounting components, cables, spares and packing. Confirm transport and local installation responsibilities separately so the scope covers both the display and its long-term operation at the chosen site.
NovaStar ja Colorlight ovat sarjan vakio-ohjausreitit. Ohjain ja medialähde valitaan pikselikuorman ja toistovaatimusten mukaan. Suunnittele virransyöttö, signaalin jakelu ja huoltopääsy ennen näyttöasettelun korjaamista. Vian sattuessa tarkista virransyöttö ja signaaliketju ennen korjausta tai vaihtoa varten tarvittavan paneelin etsimistä ja säilytä kokoonpanotiedot ja asennukseen sopivat varaosat.
A trained technician can replace an individual surface-mounted LED on Holographic mesh after diagnosing the fault. Parallel addressing allows the remaining LEDs to receive data when an individual LED fails. Plan access to the mesh, power and control equipment before installation. The repair procedure and spare parts should match the selected configuration and the condition of the panel.
Send dimensions, window orientation, sun / UV exposure and expected operating hours. Include site photos, weather exposure and maintenance access for a configuration and layout review.
P3.91 and P6.25 are our usual starting points. Mention P2.9 or P2 if you have a specific high-resolution requirement.
Piirustus, työmaakuva tai alustava idea. Kerro meille, mitä suunnittelet, ja käymme yksityiskohdat läpi suunnittelutiimimme kanssa.
Monitoimi-COB-LED-televisio 
Joustavat LED-näytöt 
Läpinäkyvät LED-näytöt 
Led-juliste 
Pyöreät LED-näytöt 
Pylväs-LED-näytöt 
Luovat ja räätälöidyt LED-näytöt 
